ACR Electronics AEROFIX 406 GPS I P-ELT - REV E Manual de apoio ao produto - Página 17

Procurar online ou descarregar pdf Manual de apoio ao produto para GPS ACR Electronics AEROFIX 406 GPS I P-ELT - REV E. ACR Electronics AEROFIX 406 GPS I P-ELT - REV E 17 páginas. Personal locator beacon fcc type approval is currently pending
Também para ACR Electronics AEROFIX 406 GPS I P-ELT - REV E: Manual de apoio ao produto (17 páginas), Manual de apoio ao produto (17 páginas), Manual de apoio ao produto (17 páginas), Manual de apoio ao produto (17 páginas), Manual de apoio ao produto (14 páginas)

ACR Electronics AEROFIX 406 GPS I P-ELT - REV E Manual de apoio ao produto
Q. What is the maximum length my GPS cable can be?
A. ACR Electronics recommends a maximum length of 400 feet using 24 AWG wire. Contact your GPS
owner's manual for more detailed information.
Q. What happens if I plug the GPS into the P-ELT first and press the GPS I or I/O button without
waiting for the GPS to acquire satellites?
A. The P-ELT will function normally in the off position, but will not store GPS coordinates. As soon as the
GPS has acquired satellites the data will be transferred to the P-ELT. If the P-ELT is activated no GPS
data will be accepted and your P-ELT will rely on the LEOSAR satellites to obtain its position by using
Doppler shift.
Q. What happens if I have downloaded GPS into my P-ELT and the Onboard GPS engine acquires
new GPS data (P/N 2799.4 only)?
A. If external and internal GPS are present, the internal GPS data will have priority at activation. If the
internal GPS has not been able to acquire your LAT/LON coordinates prior to your first burst, the
downloaded GPS coordinates will accompany the UIN to the satellites.
coordinates are obtained by the onboard GPS, these coordinates will be updated into the distress
message and the downloaded coordinates will be eliminated.
Q. How long does the P-ELT hold data in memory?
A. 4 hours. If new GPS data has not been downloaded, the AeroFix will return to default mode and utilize
the LEOSAR satellites to obtain the position using Doppler shift.
Q. How much power is needed to run the IR LED on the GPS cable?
A. The minimum power needed is 3.3V
11.0
LIMITED WARRANTY
11.1
This product is warranted against factory defect in material and workmanship for a period of five
years from date of purchase or receipt as a gift. During the warranty period ACR Electronics, Inc.
will repair or, at its option, replace at no cost to you for labor, materials or return transportation,
provided you obtain a Return Authorization from ACR Electronics, Inc., 5757 Ravenswood Road, Ft.
Lauderdale, Fl. 33312-6645. To obtain a Return Authorization, call our Customer Service
Department at (800) 432-0227. This warranty does not apply if the product has been damaged by
accident or misuse, or as a result of service or modification performed by an unauthorized factory.
Except as otherwise expressly stated in the previous paragraph, the COMPANY MAKES NO
REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, AS TO
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY OTHER MATTER
WITH RESPECT TO THIS PRODUCT. The Company shall not be liable for, consequential or
special damages.
In order to place the warranty in effect, the accompanying registration card must be returned to ACR
Electronics, Inc. within ten days of purchase.
and 2mA
DC
16
Once good navigational
Y1-03-0175 Rev. D