Dolphin BC635 Manual de instalação e manutenção - Página 13
Procurar online ou descarregar pdf Manual de instalação e manutenção para Dispensador Dolphin BC635. Dolphin BC635 19 páginas. Saving soap, saving power, promoting hygiene
Imprimir página
SETTINGS ADJUSTMENT
WITH A REMOTE CONTROL
If desired, use the remote control to adjust the soap dispenser settings. Hold the
remote control straight in front of the sensor in a distance of about 10-15cm.
Attention: Holding the soap dispenser remote control out of the recommended
range (too close or too far) may interfere with the remote's activation.
Choose the function you want to adjust by pressing on the function button as
follows:
1 SOAP QUANTITY
The 1-4 drop keys allow the user to choose the
desired soap quantity.
1: 0.2 to 0.4 2: 0.7 to 0.9 3: 1.2 to 1.6 4: 2.1 to 2.3
Indication: continues blink of the red light in the
sensor eye.
* The exact soap dosage depends on the soap viscosity.
2 ADJ
This function allows coming back to soap quantity factory settings. Press the ADJ
button. Indication: 2 blinks of the red light in the sensor eye.
3 TEMPORARY OFF FUNCTION
This function is ideal to perform any kind of activity in front of the sensor without
operating the system (for example, cleaning). The soap dispenser will remain shut
for 1 minute when this button is pressed once. To cancel this function and to return
to normal operation press the On/Off button again or wait 1 minute.
Indication: OFF – 2 fast blinks, ON – 4 fast blinks
4 REFILL THE SOAP TANK
Once the soap tank has been refiled, press the FILL button. The pump would work
for one minute in order for the soap to start coming out of the soap dispenser
spout. To stop this activity press the FILL button again.
BC 632 / BCL 632 / BC 635
|
Dolphin
|
13