Dolphin PXH847 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Adaptador Dolphin PXH847. Dolphin PXH847 15 páginas. Transparent pcie adapters

Imprimir página

Operation and Maintenance

Configuration and DIP Switches

The PXH842 has one bank of 8 DIP switches. The default factory setting for the PXH842 is Transparent Host x16 mode.
Please carefully read the documentation before modifying any DIP switch settings. Please pay close attention to ON and OFF
positions written on the DIP switch.
DIP Switch Bank – Configuration
Figure 4: DIP Switch
DIP no.
Name
Description
1
OPT1
TBD
2
OPT2
Configures a Transparent card to
Host or Target mode.
3
OPT3
Enable dual x8 link configuration
4
OPT4
Enable quad link configuration for
Transparent.
5
OPT5
TBD
6
OPT6
TBD
7
UTRES
Holds the management processors
in reset
8
SAFE
Enables the card to boot if the
EEPROM has been corrupted
Note: Some DIP switch configuration options may be changed in the future versions. Please always consult the latest user guide for
details.
PXH842 User's Guide – Dolphin Interconnect Solutions
Figure 1: DIP Switch shows the DIP switch for the PXH842. It is used to configure the adapter
card. Please leave all undocumented DIP switches in the default position. The table below
shows all the various DIP switch settings for the PXH842.
ON
Transparent mode
Enable Transparent
Target operation.
Dual x8 link on cable
ports 1-2 and 3-4
Quad x4 link on cable
port 1,2,3,4
TBD
TBD
Board management is
held in reset
Safe EEPROM
OFF
Transparent mode
Transparent Host (depends
on DIP 1)
Single x16 link, cable ports
1-4
Normal operation
Normal operation
Normal operation
Normal operation
Page 10
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF