Asian Phoenix Resources MHG-T8 Manual de instruções de utilização e manutenção - Página 3
Procurar online ou descarregar pdf Manual de instruções de utilização e manutenção para Inversor Asian Phoenix Resources MHG-T8. Asian Phoenix Resources MHG-T8 17 páginas. Micro-hydroelectric generator
Imprimir página
POWERPAL COMPONENTS
Inside your PowerPal box you will find:
• 1 x generator-turbine assembly
• 1 x penstock adaptor flange
• 1 x gate valve
• 1 x rubber gasket
• 6 x M24 foundation nuts and bolts
• 1 x control panel including electronic load controller
• 2 x ballast load elements
• 1 x Guarantee Card
• 1 x this instruction manual.
Please advise immediately if any parts are missing. Complete your Guarantee Card
and have it signed by your PowerPal dealer.
The PowerPal system consists of two major components – a hydroelectric generator
and an electronic load controller. Other components are necessary and these can be
purchased locally. The penstock (intake pipe) should be made from steel. Your
PowerPal dealer can advise you about this.
Therefore, other parts which are not included in the box but which are required to
make PowerPal work are:
• a 28m – 40m length of 4mm steel pipe with internal diameter 150mm.
• electrical wire from generator to house. See the section on 'Technical
Specifications' for the correct wire size.
• household wiring.
These are available from your dealer or local electrical store.
SYSTEM DIAGRAM
The following diagram shows how the non-electrical components fit together. Further
reading of this manual will provide the necessary explanations. Additional drawings
are found in Appendix A.
PowerPal™ T8 & T16 Turgo 3