Cyron ABIG5-A6K URBAN5 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Lanterna Cyron ABIG5-A6K URBAN5. Cyron ABIG5-A6K URBAN5 4 páginas.
Também para Cyron ABIG5-A6K URBAN5: Manual do utilizador (4 páginas)

Imprimir página

DAYTIME RUNNING LIGHTS (DRL) - 7" LIGHTS: DRL are the small array of LEDs on top

and bottom of the 7" lights. It is powered by a separate lead (normally red wire) aside from

the main plug of the integrated headlight. It is an optional hook up. Connect it to

vehicle/motorcycle's DRL wire if it is so equipped. If you are using the Harley adapter

(Cyron# ABIGC2A ) DRL wire can be connected to the spade plug of the adapter. DRL can

also be connected to the low beam (white) wire. As a final alternative DRL can be

connected via an accessory switch to +12VDC and make it operate manually or as a

accent light . Current draw for DRL is less than 0.5A.

"URBAN" ABIG7-A6K has a 2nd lead (green wire) for amber DRL lights. It can be used as

standard DRL or as directional lights in cars.

ALIGNMENT

For proper operation it is vital to check the aim of the headlight. See guideline. During

testing make sure:

a. The vehicle is on

level surface

b. There are no

excessive loads in the

vehicle effective its

leveling

c. For motorcycles it is

a good idea to align

with the rider on the

bike

d. After alignment do

a road test to assure

proper visibility has

been achieved.

Further adjustment

may be necessary to

get the optimum

performance.

Ensuring undisturbed visibility of other drivers is vital to your safety.

Drive/Ride Safe!