Ask IMPRESSION A10+ Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Projetor Ask IMPRESSION A10+. Ask IMPRESSION A10+ 8 páginas. Flash upgrade user guide

FLASH UPGRADE USER GUIDE

The settings to use depend on the current communication settings on the projector in

question.

Check the ADVANCED /SERVICE / INFO dialog box in the projector menu to

see the current communication settings to use. Change the settings in

Hyperterminal so that it matches the communication settings in the projector.

In the projector menu check the FEATURE / RS-232 and verify that

CONTROL is activated with a green tick. This is necessary to establish

communication with the projector.

Confirm with "OK" and connect by clicking on the "phone icon" in Hyperterminal.

On the empty Hyperterminal screen, press ENTER. The prompt "ASK>" should appear.

If not, go over the settings again, and restart the process so that the ASK prompt

appears.

PLEASE NOTE:

The Impression A8+/9+/10+ needs more memory compared to the rest of the

ASK A-series projectors therefore the number of EPROM's have been

increased to two.

It's now one EPROM which is called SW and one EPROM called HW. It is very

important that the correct file is flashed to the correct EPROM. If you flash the

HW bin file into the wrong EPROM the projector won't start and the EPROM

has to be physically removed and replaced with a new.

PROXIMA ASA

IMPRESSION A10+/A9+/A8+