EG Bali 500EX Manual do Proprietário - Página 4

Procurar online ou descarregar pdf Manual do Proprietário para Bicicleta EG Bali 500EX. EG Bali 500EX 8 páginas.

Imprimir página

3. Fully Electric Mode –



Turn on the electrical system to the electric bike by depressing the power button on the

handlebar control. Ride the bicycle normally as you would any bicycle.

 The motor will stop if the brake lever is depressed even if you are still pedaling the bicycle.

 The motor will stop when you stop pedaling in this mode.

 Turn on the bike's electrical system and then use the up/down button on the left handlebar

control to pick the desired pedal assist level. While the thumb throttle is engaged, the pedal

assist mode is not active and has no effect on the speed or power of the electric motor.

 Depress the thumb throttle in any increments of power you desire to power the motor of the

bicycle and it will take off.

 This mode can be used in conjunction with any of the above modes except level 0 assist.

The amount of motor power supplied while twisting the thumb throttle overrides whatever

pedal assist mode level.

 You can engage this mode whenever you want as long as the system is turned "ON" and

within Assist level 1 to 5..

 While pedaling will lighten the load demand on the electric motor, you do NOT need to

pedal in this mode of operation.

 ! CAUTION: This mode is designed to achieve a speed of up to 20 MPH. User discretion is

advised

 The motor will NOT stop when you stop pedaling while the thumb throttle is engaged.

 The motor will stop if the brake lever is depressed even if the thumb throttle is engaged.

 ! CAUTION: Remember to let go of the thumb throttle when getting on or off the bike

weather or not the brake levers are engaged.

 In this mode, the electric bike will use the as much if not more amount of battery power

than in pedal assist modes 4 or 5.

 This mode will give you the low "miles per charge" compared to most of the above pedal

assist modes of operation

Walk Assist Mode –

To use this mode turn on your Electric Bicycle system by depressing the power button on



handlebar control unit. Then depress the "-" button and hold it for 2 seconds. As long as

you hold down this button the bicycle will use the motor to help you push the bike at a rate

of about 3mph.

 This mode is useful for walking your bicycle up a slight incline if you do not want to ride it

up that incline.

About your pedal assist sensor

 Your Electric Bicycle is equipped with a torque sensor. The sensor detects the amount of

force you are pushing on your pedals. The more force you put into the pedals, the faster

the motor will spin. It's basically a pedal based throttle system.

 ! NOTE: the pedal torque sensor will not function with the brake levers depressed. This is a

safety feature we use in all our Electric Bicycles.

 The torque sensor can help modulate power usage by the motor by reducing power when

you pedal lightly, and hence save battery energy for longer range.

About the Brake Safety Feature on all our Electric Bikes.

 ALL our electric bikes make use of a wired brake lever kill switch for safety purposes. When

the brake lever is engaged, it sends a kill signal to the controller to disable the motor under