BluePoint Fasteners GT-100L Manual de Segurança e Operação - Página 2

Procurar online ou descarregar pdf Manual de Segurança e Operação para Pistola de pregos BluePoint Fasteners GT-100L. BluePoint Fasteners GT-100L 13 páginas. Gas concrete nailer

Imprimir página

CONTENTS

ITEM

SAFETY ....................................................

........................................

2. SPECIFICATION

3. GENERAL OPERATION MANUAL

MAINTENANCE ..........................................

5. EXPLODED DRAWING AND PARTS LIST ... 20

PAGE

............

1 6

IMPORTANT INFORMATION: MUST READ

BEFORE YOU START

Read and understand tool labels

and all of operating instructions,

safety precautions and warnings in

this manual before operating or

maintaining this nailer.

Failure to follow warnings could result in DEATH

or SERIOUS INJURY.

Most accidents that result from the operation and

maintenance of Nailers are caused by the failure

to observe basic safety rules or precautions. An

accident can often be avoided by recognizing a

potentially hazardous situation before it

occurs, and by observing appropriate safety

procedures.

Basic safety precautions are outlined in the

"SAFETY" section of this Manual

Hazards that must be avoided to prevent bodily

injury or machine damage are identified by

DANGERS and WARNINGS on the Nailer and in

this Manual

Never use this Nailer for applications other than

those specified in this Manual.

EXPLANATION OF TERMINOLOGY

DANGER indicates an imminent hazardous situation

which, if not avoided, will result in death

or serious injury.

WARNING i ndic at es a pot enti al ly hazardous

situation which, if not avoided, could

result in death or serious injury.

CAUTION i ndic at es a pot enti al ly hazardous

situation which, if not avoided, may

result in minor or moderate injury, or

may cause machine damage.

NOTE emphasizes essential information.

EXPLANATION OF THE FUNCTION OF THE

GT-100L NAILER

This tool has a FULL SEQUENTIAL ACTUATION

MECHANISM. Fully depress the tool against the work

surface and actuate the trigger. Follow the same

sequence to continue driving nails after the push lever

and trigger are return back in place.

SAFETY

IMPORTANT SAFETY INSTRUCTIONS FOR

USING NAILERS

READ ALL INSTRUCTIONS

This Nailer is powered by internal

combustion device.

This Nailer shall only be used with

dispensers for combustible gas

which are listed in this manual.

DANGER

1. OPERATORS AND OTHERS IN WORK AREA

MUST WEAR SAFETY GLASSES WITH SIDE

SHIELDS.

When operating the Nailer, always

w ear safety glass es with side

shields, and make sure others in

work area wear safety glasses.

Safety glasses must conform to the requirements

of American National Standards Institute,

ANSI Z87.1 and provide protection against flying

particles both from the front and side.

T h e e m p l o y e r m u s t e n f o r c e t h e u s e o f

safety glass es by the Nail er operator and

others in work area.

2. NEVER USE IN PRESENCE OF FLAMMABLE

LIQUIDS OR GASES.

This Nailer must not be used in a

c o m b u s t i b l e e n v i r o n ment or in

presence of flammable liquids or

gases, e.g. lacquer, paint, benzine,

thinner or gasoline.

This Nailer produces hot exhaust gases that

may ignite flammable materials and also

produces sparks during operation.

3. DO NOT TOUCH AROUND THE EXHAUST

OUTLET.

This Nailer produces hot exhaust

gases that may ignite flammable

materials. T he f i ri ng hea d an d

n os e w il l become hot and get

heated up after prolonged or rapid

use. Do not touch with bare hands.

4. EXPLOSION AND FIRE HAZARD.

The fuel cell is an aerosol dispensers

with flammable contents.

P ressured cont ainer and the

propellant will remain in the fuel cell.

Faillure to follow instructions may

result in explosion or fire.