EG&G ORTEC 476 Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Multiplexador EG&G ORTEC 476. EG&G ORTEC 476 14 páginas. Multiplexer/routar

STANDARD WARRANTY FOR EG&G ORTEC INSTRUMENTS

EG&G ORTEC warrants that the items will be delivered free from defects in material or workmanship. EG&G ORTEC

makes no other warranties, express or implied, and specifically NO WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE.

EG&G ORTEC's exclusive liability is limited to repairing or replacing at EG&G ORTEC's option, items found by EG&G

ORTEC to be defective in workmanship or materials within one year from the date of delivery. EG&G ORTEC's liability on

any claim of any kind, including negligence, loss or damages arising out of, connected with, or from the performance or

breach thereof, or from the manufacture, sale, delivery, resale, repair, or use of any item or services covered by this agree

ment or purchase order, shall in no case exceed the price allocable to the item or service furnished or any part thereof

that gives rise to the claim. In the event EG&G ORTEC fails to manufacture or deliver items called for in this agreement or

purchase order, EG&G ORTEC's exclusive liability and buyer's exclusive remedy shall be release of the buyer from the

obligation to pay the purchase price. In no event shall EG&G ORTEC be liable for special or consequential damages.

QUALITY CONTROL

Before being approved for shipment, each EG&G ORTEC instrument must pass a stringent set of quality control tests

designed to expose any flaws in materials or workmanship. Permanent records of these tests are maintained for use in

warranty repair and as a source of statistical information for design improvements.

REPAIR SERVICE

If it becomes necessary to return this instrument for repair, it is essential that Customer Services be contacted in advance

of its return so that a Return Authorization Number can be assigned to the unit. Also, EG&G ORTEC must be informed,

either in writing or by telephone [(615) 482-4411], of the nature of the fault of the instrument being returned and of the

model, serial, and revision ("Rev" on rear panel) numbers. Failure to do so may cause unnecessary delays in getting the

unit repaired. The EG&G ORTEC standard procedure requires that instruments returned for repair pass the same quality

control tests that are used for new-production instruments. Instruments that are returned should be packed so that they

will withstand normal transit handling and must be shipped PREPAID via Air Parcel Post or United Parcel Service to the

nearest EG&G ORTEC repair center. The address label and the package should include the Return Authorization Number

assigned. Instruments being returned that are damaged in transit due to inadequate packing will be repaired at the

sender's expense, and it will be the sender's responsibility to make claim with the shipper. Instruments not in warranty

will be repaired at the standard charge unless they have been grossly misused or mishandled, in which case the user will

be notified prior to the repair being done. A quotation will be sent with the notification.

DAMAGE IN TRANSIT

Shipments should be examined immediately upon receipt for evidence of external or concealed damage. The carrier

making delivery should be notified immediately of any such damage, since the carrier is normally liable for damage in

shipment. Packing materials, waybills, and other such documentation should be preserved in order to establish claims.

After such notification to the carrier, please notify EG&G ORTEC of the circumstances so that assistance can be provided

in making damage claims and in providing replacement equipment if necessary.