EG4 EG4-LL Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Bateria EG4 EG4-LL. EG4 EG4-LL 20 páginas. Rack mounted 48v 100ah/24v 200ah

extremely large amperage, and delayed shut down for amperage that is only slightly above maximum.

This also protects from short circuits.

Battery Communications

Each EG4 is built with the user in mind, and designed to show you as much information as possible as

easily as possible. We include an option to connect your battery to PC software to monitor the status of

your battery. This allows you to see and understand exactly what your battery is doing, as well as allowing

you to troubleshoot if you run into any issues.

DIP Switch ID Settings

ID code bits correspond to binary digits, down represents "ON", up represents "OFF". The right side of the

code bit is the low bit, and the left side is the high bit. The code range is 0~15, and the communication

mode can support up to 16 modules in parallel.

EG4-LL batteries interface with inverters and PC monitoring by designating a "Host" battery (DIP switch

ID No. 1). This battery will connect directly via an EG4 battery communications cable or a standard CAT

5, 5e, or 6 cable (for closed loop communications with non-EG4 inverter types).

If you have multiple batteries, ALL other DIP switch settings MUST be different from each other. This

allows equipment to see each battery in the bank separately.