ASKA ELECTRONICS F6PA Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Auscultadores ASKA ELECTRONICS F6PA. ASKA ELECTRONICS F6PA 3 páginas. Wireless stereo headphone

Imprimir página

Reset Mode: Connect the headphone to computer via

Micro USB cable. When red LED light flashes, eadphone

reset finished.

3.5mm music line-in function

cable to 3.5 audio jack for wired music.

(Phone call function cannot be used in this mode.)

Auto power off: Headphone will auto power off without

connecting in 30 minutes

The headphone is off status.

A) Connect the 3.5 audio wire to the headphone and

audio player.

B) You can adjust volume bottom of the audio player

or music player to reach right volume to listen music.

3.5mm Audio Cable

Pairing (One headphone supports connecting 2

phone devices )

Pairing with one phone or other devices

Make sure the headphone is powered off.

Pairing with two phones or other devices at the

same time

This headphone can support multi-connection to 2

devices. It can pair with two mobile phones

simultaneously, taking the call from any of them.

After completing pairing with the first phone, turn

off the headphone, then re-do the paring procedure

with another phone. Once finished the pairing, restart

the headphone, it will automatically connect to the

phone or device of last connected. Short pressing the

two keys of volume "+" and volume "-" simultaneously

can enable the multipoint Connect function. From the

list of found devices on another mobile phone, select

the headphone "F6PA" to connect it.

4, Sound quality with Aptx code

Featuring the apt-X code, the headsets can connect

wirelessly to any apt-X enabled devices, vastly improving

the quality of BT streaming and delivering CD-quality

sound.

Kit Contents

1. 1 X Stereo BT headphone F6PA

2. 1 X Charging micro USB cable

3. 1 X User manual

4. 1 X 3.5mm audio wire

：Connect audio line in

Press and hold the multifunctional button for 5 seconds

to enter into the pairing mode.

After red LED & blue LED flash alternately, there will be

smart voice reminding entering into pairing mode.

Activate BT function on your phone or device

and search for headphone. From the list of found

devices on your mobile phone, select the headphone

"F6PA" to connect it. Follow the instruction to enter

"0000" as PIN if the mobile phone reminder appears.

Headphone or device can be used to play your phone

music or dial phone call etc.

Active noise cancellation function(ANC)

When there is too much noise in surroundings,

Short press the ANC key, ANC function can

effectively remove 90% of low frequency noise

environment, provides excellent and beautiful high

quality sound.

Ensure that minimize the environment to the user.

Warning

1. You must choose a qualified charger from a regular

manufacturer to charge the headphone.

2. You must charge the headphone if it has not been

used for more than 12 months.

Specification

BT version:

4.1

Talk time:

22h

Stand-by time:

900h

Music play time:

20h

Wireless range:

10m

Wireless profiles:

A2DP/ AVRCP/ HSP /HFP

Impedance:

32Ω

115 ±3dB

Sound pressure level:

Frequency Response: 20Hz---20KHz

Weight:

270g

Dimension:

190 x 164 x 75mm