BlueRange BR9009000 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Acessórios para motociclos BlueRange BR9009000. BlueRange BR9009000 8 páginas. Solar powered auto-darkening welding helmet

Imprimir página

8) Technical Specifications

Model
Viewing Area
Cartridge Size
Light State
Dark State
Switch Time
Sensitivity
Delay
Arc Sensor
TIG Amps Rated
Grind
ADF Self-Check
Low Battery
Power Supply
On/Off
Sensitivity Control
UV/IR Protection
Operate Temp.
Store Temp.
Weight

9) Troubleshooting

Auto-darkening filter does not darken or flickers
• Outer or inner protection plate is soiled or damaged. (Clean or replace the plate)
• Sensors are soiled. (Clean the sensor's surface)
• Welding current is too low. (Press "SENSITIVITY" then select "High")
Slow response
• Operating temp is too low. (Do not use at temperatures below -5°C or 23°F)
Poor Vision
• Front/inside cover lens and/or filter lens are soiled. (Change the lenses)
• There is insufficient ambient light
• Shade number is incorrectly set. (Reset the shade number)
Welding Helmet Slips
• Headband is not adjusted properly. (Readjust headband)
!
WARNING
Operator must stop using the auto–darkening filter welding helmet immediately and
contact the supplier if the above-mentioned problems cannot be corrected.
BR9009000
100 x 97mm
133 x 114 x 10mm
DIN4
DIN5-9/9-13
1/25000 S
Variable adjusted by external knob
0.1S~1.0S Variable adjusted by external knob
AC/DC TIG, > 5amps
Yes (DIN4)
Yes (TEST Button)
Yes (Red LED)
Solar cells & Replaceable Lithium battery (CR2450)
Fully Automatic
Variable adjusted by external knob
Up to DIN 16 at all time
-5°C~+55°C (23°F ~ 131°F )
-20°C~+70°C (-4 °F ~ 158°F )
550g±15g
4
Page 7