Asko D1996HNDL Manual de Planeamento e Conceção - Página 10

Procurar online ou descarregar pdf Manual de Planeamento e Conceção para Máquina de lavar loiça Asko D1996HNDL. Asko D1996HNDL 15 páginas. Standard dishwashers
Também para Asko D1996HNDL: Manual de utilização e cuidados (12 páginas), Instalação e personalização (4 páginas), Manual de Planeamento e Conceção (19 páginas), Manual de utilização e cuidados (12 páginas)

Imprimir página
MODEL D1996HNDL
UNIT DIMENSIONS
US
Height
32-1/4"–35-1/2"
Width
24"
Depth
23-7/16"*
Depth w/door open
46-1/2"*
Weight
104 lb
FRONT PANELS
Model D1996HNDL is not designed to
accept a custom front panel. Even though
the controls are on top of the door, this
model installs like a standard ASKO
dishwasher. It fits in American cabinets
(4" toe kick) with a 24" wide opening.
CUTOUT DIMENSIONS
US
Height
32-1/4"–35-1/2"
Width
24"
Depth*
23-7/16"
*This depth allows a 1" (25 mm) space for
the high-loop drain hose.
NOTE: Maintain a 1/8" (3 mm) minimum
clearance between unit and cabinet.
10
Metric
819–902 mm
610 mm
596 mm
1181 mm
48 kg
2"
50mm
6-1/4" to 8-1/4"
159-210 mm
Metric
819–902 mm
The electrical and water supplies should
610 mm
enter through the area indicated by the
596 mm
shaded area. Preferably, they should come
through the right side of the machine. The
access hole must be round and smooth
and no bigger than 2" in diameter.
Specifications are subject to change without notice. See installation instructions for additional details.
ASKO D
TECHNICAL DATA
Electricity
Water pressure
Heating element
Max loading
46-1/2"*
EASYINSTALL SYSTEM
Every ASKO dishwasher comes with the
unique EasyInstall System that speeds the
installation and reduces problems. This
system has these components which are
approved by regulatory authorities (cUL):
• Over 5' of Pex hose that replaces the
24"
610 mm
• Over 6' of drainhose with an adaptable
• A 6' long electrical cord with standard,
ISHWASHER
120V, 60Hz, 15 amp
18-176 psi
1400 watt
1600 watt
water-inlet copper tubing. It has a 3/8"-
compression fitting that mates with the
shut-off valve.
drain connection.The high loop is built
into this hose on the back of the unit. If
this loop is removed to lengthen the
hose, another high-loop must be built
into the installation somewhere along
the line (typically where the hose passes
through the cabinet).
3-pronged, 110V plug. This eliminates
the need to wire anything under the unit.