Bluerock Tools MWS-808D Manual de serviço - Página 10

Procurar online ou descarregar pdf Manual de serviço para Ferramentas Bluerock Tools MWS-808D. Bluerock Tools MWS-808D 10 páginas. Wire strippers

Imprimir página
21. Use a 14mm wrench to loosen the locknuts and blade alignment bolts on each side of the
machine as shown. Note: This is only necessary if the blades and cutting channels are
misaligned.
22. Move the top roller so the blades are centered in the cutting channels.
23. Tighten each of the alignment bolts only until they touch the roller housings.
24. Back each bolt out a half turn to allow room for movement and then tighten each locknut.
Blade Alignment Adjustment