Ambery LCDT6 Manual de operação - Página 10

Procurar online ou descarregar pdf Manual de operação para Sintonizador de TV Ambery LCDT6. Ambery LCDT6 16 páginas. Super video to wxga converter external cable tv tuner

Imprimir página

Using This TV Tuner For The First Time...

When the unit is powered up for the first time, the default input to the unit is TV(RF) input and there

are no TV channels available yet. Users must train the tuner by using the channel scan function

provided in the OSD operation menu to scan all the TV channels available in your area or from local

cable TV service provider. (Note: The channel scan function is available only when the input source is

set at TV mode)

Step 1: press the "MENU" button from the remote controller.

Step 2: press "CH+" or "CH-" to scroll around all the categories until "Search" category is highlighted

and then press "VOL+" or "VOL-" to get into the sub-menu of channel search/scan.

Step 3: In the sub-menu of channel search, there are options of "CH Scan", "Manual Scan".

Step 4: Next move upward to "CH Scan" option by pressing "CH+" button from the remote.

Step 5: Once "CH Scan" function is highlighted, press "VOL+" or VOL-" to enter into the sub-menu. In

this sub-menu, there are options of "CH Scan" and "FREQ Scan". User can press "CH-" or "CH+"

button from the remote to perform either way of channel scan.

(Note: If the "CH Scan" function could not find all the available TV channels, please change to use

"Freq Scan" function to perform the channel scan again. Freq Scan function takes longer time but with

more detailed search for channel frequencies.)

Step 6: Once "CH Scan" or "Freq Scan" is selected, press "VOL+" or "VOL-" from the remote control

to perform the channel scan accordingly and wait for the scan process to be finished completely.

Watching satellite video or DVD playing on your monitor

Step 1: make sure that the DVD/VCR player, satellite receiver or other video device is properly

connected to the video input of this external TV tuner module.

Step 2: press "INPUT" button on your remote controller or on the front control panel of this unit to

select composite video or s-video input channel.

Step 3: play your video device and you should see the video show up on your display.

OSD MENU OPERATION

When you press the "MENU" button on the remote control, an OSD(On-Screen-Display) menu will pop

up with 6 main category icons on the display screen as follows: "Picture", "Search", "Audio", "Setup",

"Time" and "Access.".

Note: All the selectable functions provided in the OSD menu can be accessed from using the

remote controller.

"MENU" button: For entering into the main menu, going back to the previous sub-menu or exiting the

menu.

"VOL+" / "VOL-" buttons: For entering into each sub-menu, setting up parameters and selecting

function to be performed.

"CH+" / "CH-" buttons: For moving around between the listed categories and items in the main menu

and each following sub-menu.