d&b audiotechnik C690 Manual - Página 4

Procurar online ou descarregar pdf Manual para Altifalantes d&b audiotechnik C690. d&b audiotechnik C690 8 páginas.

CAUTION!

passive

crossover

Connector wiring

C6/C690 Manual

The C6 loudspeaker is a full range, two-way bass-reflex enclosure

fitted with a 12" LF driver passively connected to a 2" HF

compression driver which is coupled to a 60° x 40° CD horn.

The C6 cabinet is constructed from marine plywood and has an

impact resistant paint finish. The front of the loudspeaker cabinet is

fitted with a rigid metal grill covered with a replaceable

acoustically transparent foam. The cabinet top plate has an integral

handle and four M10 threaded inserts for mounting brackets and

rigging. The L shaped metal plate at the bottom of the cabinet also

incorporates a handle, four M10 threaded inserts and a socket to

accept a loudspeaker stand.

Version C690

The C690 has a wider horizontal and vertical dispersion than the

C6, the only difference being the 90° x 50° CD horn.

Only operate C6/C690 cabinets with a d&b D12 or E-PAC

amplifier in C6 mode or a P1200A mainframe fitted with a C6

controller module, otherwise there is a risk of damaging the

loudspeaker components.

Connections

The C6/C690 cabinets are fitted with a pair of EP5 connectors. All

pins of both connectors are wired in parallel. The C6 uses the pin

assignments 1/2. Pins 3/4 and 5 are designated to d&b active

subwoofers.

Using one connector as the input, the second connector allows for

direct connection to additional cabinets.

The C6/C690 can be supplied with NL4 output connectors as an

option using the pin assignment 1+/1–. Pins 2+/2– are designated

to d&b active subwoofers.

Pin equivalents of EP5 and NL4 connectors are listed in the table

below.

EP5

NL4

1–

EP5 and NL4 pin assignments

(3.0E)

5 (SenseDrive SUB)

2–

n.c.

Page 4 of 8