D&D Technologies LokkLatch Magnetic Instruções de instalação - Página 2
Procurar online ou descarregar pdf Instruções de instalação para Fechaduras D&D Technologies LokkLatch Magnetic. D&D Technologies LokkLatch Magnetic 2 páginas.
Imprimir página
9
MARK AND INSTALL KEEPER TO POST
12
CHECK HORIZONTAL ALIGNMENT
2
#
MAINTENANCE: REMOVE KEY FROM LOCK AFTER USE. Do not lubricate
with petroleum-based products. Ensure all screws are tightened firmly
and that the latch is kept free of ice, dirt and other debris which could
impair performance. Periodic horizontal and/or vertical adjustment may
be required.
Hi-Performance Hardware
CHECK VERTICAL ALIGNMENT
10
Removing Screw Covers (if necessary)
1. Insert blade horizontally underneath cover
2. Twist screwdriver and remove
3. See Step 8 to replace
Adjust keeper so that the raised bump
aligns with same on latch.
GatesPlus - www.gatesplus.com.au
Available from -
11
WIND SCREW TO JOIN COMPONENTS
Adjust keeper so that the raised bump
aligns with same on latch
A
5
/
" (16mm)
8
B
2
#
Tube helps protect locks from corrosion.
NOT mandatory.
Hole # 2 on fitting jig is for recessing side
fixing legs on Latch for wood gates
LLMINSTR000PA
• instr LL MAGNETIC 3 4 13