AMBIC EasiFoamer Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Equipamento de construção AMBIC EasiFoamer. AMBIC EasiFoamer 2 páginas.

5. Make sure the connections on the peristaltic pumps are tight

If the connections are not tight, there is a risk that the connections will leak air and compromise the

performance of the pumps when dispensing chemical. Ensure that no strain is put on the

connections - especially when the chemical container is being changed.

6. Check the hanger assemblies

Ensure that the non-return valves and filters are installed in the correct orientation/position.

7. Adjust the air

The air regulator can be adjusted up and down to vary the 'wetness' of the foam to suit the chemical

or for user preference (see main user manual for adjusting the liquid pressure switch).

8. Sleep Timer

To conserve power the EasiFoamer™ unit is fitted with a 'sleep function' that turns the unit off after

a set period of no activity. This is set to 30 minutes by default (see main user manual for adjusting

this parameter).

9. Make sure you are using a compatible chemical

•

Do NOT use barrier dips suitable only for dipping applications;

•

Use a chemical specially formulated for foaming applications;

•

Use a 2 pump model for applications using 2 part chemicals such as Chlorine Dioxide.

Install non-return

valves on air and

chemical lines

Install filters before

each chemical non-

return valve only

EF7514E v1.3 (17.10.2019)