Asko TD30 Manual de serviço - Página 3
Procurar online ou descarregar pdf Manual de serviço para Secador Asko TD30. Asko TD30 10 páginas.
Imprimir página
Handling
1. Sort the textiles.
2. Turn on the main switch,
3. Open the door, load the textiles, then close the door again.
4. Select program with the knob. The programs you may choose from are:
1. Extra dry
2. Dry
3. Normal dry
4. Iron dry
5. Timed dry. program
6. Air fluff. program
If you select timed drying program or air fluff. program, adjust the time with
For a description of the program types, see the T700 service manual.
5. Select options required, see next page.
Selected option is indicated by a lit LED next to the appropriate button.
6. Start the program by pressing the
7. Drying program finished. The text
After each tumble drying the fluff filter must be cleaned and the condensation tank (TD40 only) must be
drained.
8. When you have finished tumble drying, turnoff the main switch,
Display indications
Explanation
The display
shows
No program selected
One or two digits, followed by an h.
Delayed start is selected and the program has started.
The display shows the number of hours left until the program starts.
One digit, an h followed by two digits or 1-2 digits only, means that
a program is running.
The display indicates in steps of five minutes how much time remains
in the program in hours and minutes.
Program finished. Remove washing.
The program is in the cooling sequence.
Wait until the program has finished.
When the Non-Crease option has been activated the
drum is rotated once a minute. Meanwhile this text is
shown in the display. You can interrupt the program
at any time by opening the door.
P1
When programs P1 – P4 are selected, P1 for example is
shown on the display.
.
- button.
on the display shows that the program has finished.
, and close the door.
Time indication for air vents is only indica-
ted in the cooling phase.
if necessary.