Asko TD77 Instruções para o utilizador - Página 6

Procurar online ou descarregar pdf Instruções para o utilizador para Secador Asko TD77. Asko TD77 16 páginas. Tumble dryers

Overheating cutout

The machine incorporates a manually-resettable overheating cutout, operating

at a temperature of 150°C.

Thermostat

The thermostat has an automatic reset and the breaking temperature is of

115°C. It is used for indication of fluff in the filter or in the condenser. See fault

signals F4. Not all markets.

Capacitor

The drive motor capacitor is of 8µF.

Buzzer

A built-in buzzer is fitted so that the end of the program can be indicated audibly

if required.

Lighting

An interior drum light is fitted and is operated by the door switch.

Temperature sensing

Machine temperature is controlled by a thermistor for exact control. If the ther-

mistor is loose or gets a short circuit, the program is stopped. See fault signal

F3.

Moisture sensing

A moisture sensor, measuring the humidity of the circulating air, controls the

drying process. The output from the sensor should be between 1-16 mV DC

when the machine is running. Other values from the sensor will stop the pro-

gram. See fault signal F5.

Interference suppression

The machine incorporates two RFI suppressors.

Starting relay

A relay mounted on the electrical components platform interrupts the power a) if

the machine overheats, b) if the door is opened or c) at the end of a program.

Mains cable

The mains cable is an RKK 3x1,5 or 5x1,5 mm

, with variants for different

markets.

Maximum operating time

In order to prevent the dryer from operating indefinitely (for whatever reason),

the maximum running time is 180 minutes, after which the program is

interrupted.See fault signal F2.

TD 73