D&R Telephone Hybrid-2 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Router sem fios D&R Telephone Hybrid-2. D&R Telephone Hybrid-2 18 páginas.

Back panel lay-out

Power

Power Cord

LINE:

PHONE:

C-BALANCE:

R-BALANCE

GPI

AUDIO + GPIO

RECEIVE

SEND

A large ring button enables you to pick up the line from the unit itself or from your mixer when connected

via its GPIO to the telephone Hybrid. When a call comes in it lights up green in the rhythm of the ring. When

the line is picked up by pushing the button it turns into red. When it starts blinking red the line connection is

lost.

Both levels of receive and send can be adjusted to suit your requirements. Incoming signals can be

tailored by the variable high and low cut signal while talking to people calling the station.

A ducking system reduces the incoming signal while talking to people calling the station to provide for an

improved intelligibility.

HIGH LIGHTS.

• Active balanced interfacing.

• Variable high and low cut filters.

• Industry standard connectors

• Superb audio separation.

• Externally adjustable R and C balance.

• Remotely controllable.

• GPIO interfacing with mixing consoles.

• Auto Ducking.

mains power switch.

The unit is powered by a removable IEC type power cord. An internal switch

is provided for 115/230V selection.

RJ-12 connector to connect with the public telephone network.

RJ-12 connector to connect with a handset.

8 pole mini-dip switch to select the optimum side tone attenuation.

Internal potentiometer to adjust for optimum side tone attenuation.

Jack connector for remote control. (1:1 for D&R's Scorpius console)

A combination of audio in/outputs and logic for D&R's Lyra console.

Male XLR to be connected to input of the mixer.

Female XLR input to be connected to Mix Minus/Clean feed (N-1)output of the

mixer.

Manual page 4