Ambient Air NDK15-12K Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Aquecedor Ambient Air NDK15-12K. Ambient Air NDK15-12K 9 páginas. Panel heater slim 1.5kw

Imprimir página

Description of each symbol:

: High setting: when the high setting is selected, the "

: Low setting: when the low setting is selected the "

: Timer, When the ON/OFF timer is set to ON, the

: When setting the temperature or timer, the

: Displays the current room temperature.

Turning on the heater:

Plug the heater into the mains supply; press the main "I /0" switch to the " I " position, then press the

the heater ON. Press the

Setting the temperature:

In order to set the temperature, the heater has to be working at heating mode: High or Low. Press the "+" or "-" button,

the temperature

digit will flash, continue to press the "+" or "-" button to set the desired temperature ( temperature

range:5 - 35 ℃). After about 5 seconds without pressing, the display will show the current temperature , now the

desired temperature is set.

NOTE: If the current temperature is higher than the set temperature ,the heater will stop working, for example, you set

20℃, but room temperature is 25℃, the heater will not work.

Select the heat setting.

There are two heat settings on this heater( the default setting is High),press the "M" button to select the heating setting.

1. High: 1500w,

will illuminate.

2. Low: 750w,

will illuminate.

Timer setting:

A: Setting the timer to turn heater ON automatically:

In order to set this function, the heater must be turned off firstly. Press the timer button

flash on the display. Press "+" or "-"button to set the desired time (0-24hrs) for the heater to turn on automatically. After

the time is set ,the room temperature will show on the display.

B: Setting the timer to turn heater OFF automatically:

In order to set this function, heater must be working status. Press the timer button

on the display. Press "+" or "-"button to set the desired time (0-24hrs) for the heater to turn off automatically . After the

time is set, the room temperature will show on the display.

C: Cancelling a timer setting:

When the timer indicator is illuminated, pressing the

D: Checking the ON/OFF time:

When the ON/OFF timer is set, press the

Using the remote control

There are six function buttons on remote control, function are as follows:

SYMBOL

digits will flash.

button again to turn the heater OFF.

to check the time setting.

FUNCTION

Display & function ON/OFF

Heating mode: HigH/Low

Timer setting

Increase the temperature and timer setting

Decrease the temperature and timer setting

" digit in the display will illuminate.

will illuminate.

button will cancel the timer setting.

button to turn

will illuminate and "0" will

will illuminate and "0" will flash