Ambient Weather WS-07 Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Termómetro Ambient Weather WS-07. Ambient Weather WS-07 15 páginas. Wireless indoor/outdoor 8-channel thermo-hygrometer with jumbo display
Imprimir página
5.1 Min/Max Mode
The Min/Max mode displays the minimum and maximum temperature and humidity (since reset of the
unit) for the indoor, remote channel 1 through 8 sensors.
Prior to entering the MIN/MAX mode, press the CHANNEL/+ button to select the temperature and
humidity values you wish to view.
1. Display Maximum. Press the MIN/MAX button once to display the maximum. The MAX
icon will be displayed.
2. Clear Maximum. To reset the maximum values to the current values, press and hold the
CLEAR button for 3 seconds.
3. Display Minimum. Press the MIN/MAX button again to display the minimum. The MIN
icon will be displayed.
4. Clear Minimum. To reset the minimum values to the current values, press and hold the
CLEAR button for 3 seconds.
To return to normal mode, press the MIN/MAX button again.
5.2 Indoor/Outdoor Channel Selection
Press the CHANNEL/+ button to switch the display between the indoor temperature and humidity
remote sensors 1 through 8, and scroll mode
outdoor sensors will be displayed in five second intervals.
5.3 Temperature Units of Measure
The default temperature units of measure are degrees Fahrenheit. To toggle between degrees Celsius
and degrees Fahrenheit, press and hold the MIN/MAX button for 3 seconds.
5.4 Sensor Search Mode
If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire
the signal:
1. If a specific channel is lost, press the CHANNEL/+ button to display this channel, then Press
and hold the CHANNEL/+ button for 3 seconds, and the remote search icon
constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote search
icon
will turn off, and the current values will be displayed.
2. If new sensors are added, subtracted, or multiple sensor channels are lost, press the
CHANNEL/+ button until the indoor channel
CHANNEL/+ button for 3 seconds, and the remote search icon
displayed for up to 10 minutes. Once the signal is reacquired, the remote search icon
will turn off, and the current values will be displayed.
5.5 Best Practices for Wireless Communication
Note: To insure proper communication, mount the remote sensor on a vertical surface, such as a
wall. Do not lie the sensor flat.
Wireless communication is susceptible to interference, distance, walls and metal barriers. We
recommend the following best practices for trouble free wireless communication.
1. Electro-Magnetic Interference (EMI). Keep the console several feet away from computer
monitors and TVs.
2. Radio Frequency Interference (RFI). If you have other 433 MHz devices and
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
. In scroll mode, all of the indoor and detected
is displayed.
,
will be
Press and hold the
will be constantly
Page 8