ACR Electronics Earlswood EW1MF Техническое руководство - Страница 8

Просмотреть онлайн или скачать pdf Техническое руководство для Плита ACR Electronics Earlswood EW1MF. ACR Electronics Earlswood EW1MF 12 страниц. Multifuel stove

Печатать страницу

Re-fueling

Always refuel onto a bed of hot embers.

Never overload the stove – it will work very well with two medium sized logs.

Once you have added more fuel, leave the door slightly ajar for a few

moments afterwards to allow the initial volatiles in the fuel to burn. Once

the new fuel is established, close the door and control the burn rate as

above.

Occasionally fumes may be emitted into the room during the refueling

process.

Persistent fume emission is dangerous and must be investigated. If fume

emission persists open doors and windows to ventilate the room and let the

fire die out. Have the chimney inspected for blockages and clean if

required. Do not relight the fire until the cause has been found. We

recommend that you seek professional advice.

This appliance has been designed to be burned with the door closed at all

times other than when refueling. It should not be operated as an open fire.

Typical refueling intervals for wood is 1 hour and smokeless fuel is 2 hours.

Daily Maintenance

The ashpan should be checked and emptied regularly. You should never

allow the ashes in the pan to build up to the level of the grate. If they are

allowed to build up, the grate will become sandwiched between the ash

below it and above it. This will overheat the grate and cause distortion and

premature wear.