ACR Electronics Pathfinder 2 Руководство по поддержке продукта - Страница 11
Просмотреть онлайн или скачать pdf Руководство по поддержке продукта для Морское радио ACR Electronics Pathfinder 2. ACR Electronics Pathfinder 2 20 страниц. Search and rescue transponder
Печатать страницуd.
Remove bracket and SART
e.
Drill four holes C to suit attaching parts.
f.
Secure bracket to bulkhead
g.
Place SART mast in clips and retaining strap to bracket.
4.
OPERATING INSTRUCTIONS
To operate the SART:
1.
Remove the SART (with installed pole) from the bracket.
2.
Activate the SART as follows:
a.
Push the lanyard spool in and turn it counter-clockwise until
the seal breaks and the switch clicks into the ON position.
Figure 4 shows switch in OFF position.
Figure 4: ON-OFF-
b.
Both lights
and the buzzer will beep twice.
will flash slowly showing that the
Mode.
Figure 5: Mounting the SART in a Life Raft
TEST Switch
will flash twice
After this the yellow light
SART is in the Receive
Y1-03-0154 Rev. A
11