AMC A100 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель AMC A100. AMC A100 8 страниц. A series
Также для AMC A100: Руководство пользователя (8 страниц), Руководство пользователя (7 страниц)

Operation

Front and back panels

POWER SWITCH

Before turning on the amplifier, check all connections and turn down the level

controls. A momentary muting is normal when turning the amplifier on or off.

(Caution: Always turn on your power amplifier last, after all other connected

equipment, and always turn off your power amplifier before other connected

equipment.)

POWER LED INDICATORS

These LEDs illuminate when the power is turned "ON".

PROTECT LED INDICATOR

These LEDs illuminate if the power amplifiers output connection is shorted or the

load impedance is too low. When this LED lit up, turn OFF the device and check

output connections.

SIGNAL LED INDICATOR

This LED illuminate when input signal greater than 100 mV is present.

CLIP LED INDICATOR

This LED illuminate when amplifier output is within 3dB of clipping. Occasional

blinking is acceptable, but if LED lights on more than intermittently. turn down

either the power amplifier level or reduce the output level of the preceding

component to avoid audible distortion.

USER MANUAL

A SERIES Amplifier

FUSES

Fuse holders for T2A-6.3A/250V fuses. If these fuses continuously blow, shut off

the unit and have it serviced by qualified service personnel.

AC VOLTAGE SELECTOR SWITCH

Set for the proper voltage for your area: ~115V (60Hz) or ~230V (50Hz).

MODE SELECTOR

Select the stereo or bridge amplifier configuration. If bridge mode is selected, the

minimum loudspeakers impedance should not be less than 8Ω.

FANS

The fan speed is varied automatically to maintain the proper internal operating

temperature.