Flitework Extra 300LPX Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка Flitework Extra 300LPX. Flitework Extra 300LPX 13 страниц.

To fit the fairings with adhesive tape against the

body is normally enough.

Place the wheel with the adjusting rings on the

shaft, that it is in the middle of the wheel pants.

Installing the rudder:

The lever parts of Extra 300 LPX consists of high

quality aluminium-, steel- and plastic parts. The

lever system is adjustable stepless. Very impor-

tant is, to make the 5 mm hole for the M5 bolt in

correct position and right angular, using a box

column drill. The lever system is able to be adapt-

ed stepless to any servo angel. The installation of

the lever system can be made before or after

glueing the hinges into the rudder. The lever

system can be mounted or dismounted any time.

Screw the wheel hub into the gear bow and take

care, that the edges of the hex head are parallel to

the edges of the bow.

Screw the wheel pants with M3 screws to the gear

bow. Look for a parallel alignment of the pants!

8mm

28mm

During glueing the hinges, look for the correct

adjustment of the axis.

- 4 -

Axis direction !!