Flocorp GUARDIAN 1000 G1 Руководство по эксплуатации - Страница 15

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы Flocorp GUARDIAN 1000 G1. Flocorp GUARDIAN 1000 G1 20 страниц. Wireless monitoring system

Печатать страницу

TROUBLE SHOOTING

ERROR CODES

If the data transmission was not successful from a Guardian 1000™, a red LED will light and the green LED will flash an error

code.

NUMBER OF RED FLASHES

(877) 356-5463

(p) 330-331-7331

ERROR CODE DESCRIPTION

Internal Hardware Error: Guardian could not initialize properly due to an internal

hardware error. If this problem continues, replace the Guardian unit.

Low Battery Voltage: Guardian could not transmit due to a low battery voltage. Replace

the batteries and re-try a data transmission.

Radio Error: The Guardian's wireless transmitter did not power on properly. Re-try a

data transmission. If this problem continues, replace the Guardian unit.

Cellular Service Error: The unit did not detect cellular service. Verify that there is service

in the area using the technique in Section 4.2 or check GSM coverage information on

Web Sites in Section 4.6. Ensure that the antenna is tightly connected to the unit and is

vertical. If still not successful, contact FLO-CORP Customer Service for confirmation of

data channel availability.

Cellular Busy Error: The Guardian could not transmit because the cellular network is

busy. Re-try data transmission.

Radio Respond Error: The Guardian's wireless transmitter did not respond to the

command to transmit data. Re-try a data transmission. If this problem continues,

replace the Guardian unit.

Low RSSI Error: The data transmission failed due to low signal strength Error Code 7 in

Section 7.1. Apply the technique indicated in Section 4.3 to establish the best location

for an external antenna to improve the signal strength.

Failed Transmission Error: The data transmission failed. Insert new batteries into the

unit and re-try a data transmission. If this problem continues, contact FLO-CORP

Customer Service.

Radio Error: The Guardian's wireless transmitter did not initialize properly. Re-try the

data transmission. If this problem continues, replace the Guardian unit.

Memory Error: The Guardian's memory has been corrupted. If this problem continues,

replace the Guardian unit.

(f) 330-331-7172

www.FLO-CORP.com

REVA 1116