Amcor AHM8 Инструкции

Просмотреть онлайн или скачать pdf Инструкции для Электрический нагреватель Amcor AHM8. Amcor AHM8 1 страница. Amcor inc. wall mountable/portable heater wheel instructions

Печатать страницу

Model AHM8

Wall Mountable/Portable Heater

WHEEL INSTRUCTIONS

For more information, please see the enclosed Owner's Manual,

or call 1-866-361-2233, or visit www.amcorgroupusa.com

Installing Wheels

Fig. A

As shown in Figure A, the two wheel

sets come with looped clips that

snap into the unit.

Fig. D

Figure D shows the successful

completion of the aligned looped

clips inserted into the open slots

after they have "clicked" into place.

Removing Wheels

Make sure the unit is unplugged and cooled before

taking the following steps.

Turn the unit over.

With a Phillips head screwdriver, please remove the screw.

Please do not attempt removing the wheel sets out

immediately; they are locked into place by the looped inserts.

As shown in Figure G, push the loops outward to remove

them off the locked position. This will then free the wheels so

that you may remove them from the unit easily.

Make sure you place the wheel sets and screws in a safe place

for future use.

Fig. B

Figure B displays the back of the unit where the

wheel sets are set in place, directly over the

screw holes on the unit.

As shown in Figure C, you must align the looped

clips in the open slots bordering the hole set

on the unit. The wheel sets should then click

in place as shown in Figure C as well.

NOTE: The supported block side of the wheel

sets aligns with the back side lip of the unit.

Fig. E

With a small Phillips-head screwdriver, take the

provided screw and secure the wheel set into

place. Example shown in Figure E.

Fig. C

Fig. F

Figure F displays the successful completion

and the security of the completed wheel set.

The mobility of your new Amcor AMH-8

Portable heater is now complete and you are

now free to move it around your room.

Fig. G