Amcrest IP5M-F1180EW-V2 Руководство пользователя - Страница 16

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Amcrest IP5M-F1180EW-V2. Amcrest IP5M-F1180EW-V2 20 страниц. 5mp v2 ultrahd fisheye poe camera

Печатать страницу

To access your camera from your computer you will need to first locate the camera's IP address. To locate the

camera's IP address is it highly recommended to download our free Amcrest IP Config Tool software. The Amcrest

Config Tool can be downloaded at the following web page:

In the All Downloads menu, click on IP Config Software to begin the free download. Once the download has

completed installing, locate the IP address associated with the device you would like to view in the browser.

Open the web browser and enter this IP address into browser. Press "Enter" to access the web user interface.

In the web user interface, enter the login credentials for your device. If this is the first time accessing the device,

the username and password will both be admin. Click on Login.

If this is the first-time logging into your device, you will be prompted to modify the password for your device. To

modify the password, enter the new password you would like to use in the New Password field and confirm. The

password used should be between 8 and 32 characters long with a combination of letters and numbers.

Click OK when and allow the stream to load.

Remote Web Access Setup

There are two main methods for setting up remote access: UPnP/DDNS, and Port Forwarding.

Using Universal Plug and Play (UPnP) and Dynamic Domain Name Server (DDNS) functionality is the easiest way to

setup stable remote access. For this method, your router should support the uPnP networking protocol and the

protocol should be enabled. Please refer to your router manufacturer's documentation to learn how to enable

uPnP on your router.

Below is a step-by-step walkthrough that details how to setup Amcrest cameras for Remote Web Access using

UPnP and DDNS:

Using the left-hand menu, go to the Connection menu, and write down the HTTP port. It is recommended

to ensure the port number is at least 5 digits long to prevent any port conflicts. If need be, change the port to a 5-

digit number that is less than 65535, note the number down, and click save before proceeding to the next step.

The system will prompt you to reset the camera. Click OK and wait for the camera to restart.

Restarting the camera may cause the device to use another IP address. Use the included IP Config tool to

find the IP address as detailed previously in this document.

Click the Connections menu item on the left-hand menu and ensure that the HTTP port has changed.

Click the DDNS menu item on the left-hand menu, pick Amcrest DDNS from the drop-down box, click the

checkbox next to Server Type, and then click the Save button on the bottom right.

To set a custom DDNS name, fill out the Domain Name field and click Save.

Write down the entire Domain Name field, including the white text that says.AmcrestDDNS.com

10.

Click the UPnP menu item on the left-hand menu and click the enable checkbox at the top.

11.

While in the UPnP menu, double click the HTTP port, and change both the internal and external HTTP

ports to match the number that was used in step 2.

12.

Uncheck the last 4 checkboxes in the PAT table on the UPnP menu.

amcerest.com/downloads