Amcrest IP5M-F1180EW-V2 Руководство пользователя - Страница 19
Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Amcrest IP5M-F1180EW-V2. Amcrest IP5M-F1180EW-V2 20 страниц. 5mp v2 ultrahd fisheye poe camera
Печатать страницуSection 1: This bar allows the user to select which stream type and which protocol they want to choose.
Section 2: The functions bar allows the user to perform different camera functions while in live mode. See the
table below for an explanation of the different functions available:
Button
Function Name
Alarm Output
Snapshot
Manual Record
Audio
Talk
Section 3: This bar allows the user to change video settings for the live view screen. See the below table for an
explanation of the video settings:
Button
Function Name
Image Adjustment
Adapt/Original Size
Full Screen
Width/Height Ratio
Fluency
Rules Info
Section 4: This section of the Live tab shows the picture that the camera is broadcasting. The bitrate is shown in
the top left corner, the native resolution is shown in the top right corner, the time stamp is shown below the
native resolution, and the camera type is shown in the bottom left corner.
Section 5: This section allows the user to have quick access to Live view, Playback and Cloud Storage options. If you
select Cloud Storage you will be directed to amcrestcloud.com to access or register an Amcrest Cloud account.
Click this button to generate an alarm output signal. This button becomes
red/grey depending on alarm output activation or cancellation.
Click this button to take a screenshot of the live feed. The picture is saved at
the path specified in Setup -> Camera -> Video -> Path.
Click this button to manually record video. The video is saved at the path
specified in Setup -> Camera -> Video -> Path.
Click this button to enable or disable audio output from the camera. This
feature allows the user to listen in on the audio the camera's microphone is
picking up.
Click this button to activate the talk feature on the camera. Used primarily to
activate microphone feature on the camera. Note: The camera does not have
built-in microphones or speakers. To use 2-way audio, you will need to attach
an external RCA device to the dongle wires on the device.
Function Description
This button opens the image adjustment toolbar, which allows the user to
adjust brightness, contrast, saturation, and hue for the live feed's picture.
This button allows the user to switch between displaying the original size of
the stream in its set resolution, or to adapt to the size of the monitor display
the feed is being viewed on.
This button allows the user to make the live feed go into full screen mode.
Double click the mouse or click the ESC button to exit full screen mode.
This button allows the user to change the width/height ratio for the live feed.
The options are Original and Adaptive. Original uses the aspect ratio of the
stream's set resolution, and adaptive fits the feed to the aspect ratio of the
monitor display the feed is being viewed on.
Adjusting the fluency allows the camera to compensate for any network
discrepancies to increase fluency of the stream.
This button allows the user to view IVS rule info on the live screen. This will
display the drawn lines and show activity once the rules have been triggered.
Function Description
19