FLOJET Bottled Water Dispenser Plus Руководство по установке и обслуживанию - Страница 8
Просмотреть онлайн или скачать pdf Руководство по установке и обслуживанию для Диспенсер FLOJET Bottled Water Dispenser Plus. FLOJET Bottled Water Dispenser Plus 17 страниц.
Печатать страницу
Dual Inlet Bottled Water System
Installation and Maintenance Instruction Insert
(To be released in near future)
INVENTORY OF SYSTEM COMPONENTS
A. Pump Module with On/Off Rocker Switch, 3.5 ft (1 m) cord.
B. Suction Wand and Hose Assembly.
C. 20 ft. (6.1 m) of 1/4 in. (6.35 mm) Discharge Tube.
D. Kit Fitting: Hose port/connector, compresion nut and sleeve.
E. Wall power transformer.
A
B
F
C
D
E
F. Auxiliar feed tube.
MOUNTING OF SYSTEM
Select a cabinet large enough to accommodate two
(2) five gallon bottles and suction wands assemblies. Two
bottles can be maximum sixteen inches apart. Place the Pump
Module on the floor of the cabinet with on/off switch and suction
tube facing out toward the cabinet doors. Position as close as
possible to a grounded electrical outlet and place the five gallon
bottle close to the Pump Module without kinking the suction
hose.
The Bottled Water Dispensing System may also be placed in a
pantry, closet, cellar or other location
where a grounded electrical outlet is available.
8