Flomec G Series Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Flomec G Series. Flomec G Series 16 страниц. Industrial and chemical models
Также для Flomec G Series: Руководство пользователя продукта (20 страниц), Руководство пользователя продукта (20 страниц)
Печатать страницу
To the owner...
Congratulations on receiving your
FLOMEC
G Series Turbine. We are
®
pleased to provide you with a product
designed to give you maximum reli-
ability and efficiency.
Our business is the design, manufac-
ture, and marketing of liquid handling,
agricultural, and recreational prod-
ucts. We succeed because we provide
customers with innovative, reliable,
safe, timely, and competitively-priced
products. We pride ourselves in con-
ducting our business with integrity and
professionalism.
We are proud to provide you with a
quality product and the support you
need to obtain years of safe, depend-
able service.
President
Great Plains Industries, Inc.
TABLE OF CONTENTS
General Information .............................2
Installation ...........................................3
Maintenance ........................................4
Troubleshooting .................................10
Specifications ....................................13
Service...............................................15
2
GENERAL INFORMATION
This manual will assist you in install-
ing and maintaining your FLOMEC G
Series Turbine. For best results, take
the time to fully acquaint yourself with
all information about all components of
your G Series Turbine. If you need as-
sistance, contact the distributor from
whom you purchased your turbine.
Product Description
FLOMEC G Series Turbine flowme-
ters are volumetric flow measurement
devices. The moving fluid is used to
turn a rotor, which is suspended in
the flow stream. The rotating speed
of the rotor is proportional to the fluid
velocity or flowrate. As the blades from
a spinning rotor pass by a magnetic
sensor, an AC voltage pulse is gener-
ated and transmitted to the readout
instrument. Each pulse is equal to a
given volume of liquid, therefore "x"
number of pulses are equal to a gal-
lon, litre, pound, barrel, etc.
Turbine Sizing
FLOMEC G Series Turbines are
identified by the internal diameter of
the inlet and outlet.
Model 050
½ in. (0.6-6.0
Model 051
½ in. (0.8-6.0
Model 075
¾ in. (1.6-16
Model 075E ¾ in. (2.3-23
Model 100
1 in. (6.7-67
Model 150
1½ in. (17.7-177
Model 200
2 in. (33-330
Model 300
3 in. (60-600
Turbine flowmeters should be sized
in accordance to the actual flowrate
and not the process pipe size. For
example: a process having a flowrate
of 10-20 GPM in a 1-½" process line
requires either a Model 075E or Model
100 turbine flowmeter.
Another important factor to take into
consideration when sizing a turbine
flowmeter is instantaneous flowrate.
)
gpm
)
gpm
)
gpm
)
gpm
)
gpm
)
gpm
)
gpm
)
gpm
921977-01C