AMD MulTView ALL-IN-WONDER 9700 PRO Установка и настройка Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Установка и настройка Руководство пользователя для Компьютерное оборудование AMD MulTView ALL-IN-WONDER 9700 PRO. AMD MulTView ALL-IN-WONDER 9700 PRO 2 страницы.
Печатать страницу
8
Using the internal CD audio cable, connect the small, white CD AUDIO
plug on the ALL-IN-WONDER 9700 PRO to the sound card's CD AUDIO
IN connector (refer to your sound card manual). If you choose a different
connector, be sure to make note of its name. See the illustration on
page 4.
9
Double-check all connections and bracket screws, turn on the system
power, and then start the computer.
10
When New Hardware is detected, click Cancel, and let Windows finish
loading.
11
Insert the ALL-IN-WONDER 9700 PRO Installation CD. If the CD does
not Autorun, navigate to the CD, double-click Atisetup.exe, click
Software Install, and then follow the on-screen instructions.
12
When the software installation is complete, shut down your computer.
Optional: Now is a good time to connect the REMOTE WONDER
receiver to a USB port on your computer.
13
Restart the system.
Windows will finish installing the final components. You are now ready to
set your desired resolution and start the TV application. The Initialization
Wizard will guide you through the audio setup.
Page 2
To install your TV WONDER
1
Shut down your computer, and then turn off the power or unplug it.
2
Install the TV WONDER in a PCI slot, ensuring that the card is
properly seated before replacing the bracket screw.
3
Using the external audio cable supplied with the TV WONDER,
connect the audio output from the TV WONDER to an audio input
(usually LINE IN) on your sound card. If you choose a different
connector, make note of its name. See the illustration on page 4.
4
Double-check all connections and bracket screws, replace
the PC cover, turn on system power, and then restart the computer.
During the installation, you may see warnings that the drivers are not
certified by Microsoft; please continue with the installation.
5
Restart your computer if prompted.
6
Launch TV. The Initialization Wizard will prompt you to enable
MulTView, and will assist with the audio setup described in Step 3.
Page 3