AME System ErgoMan Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Настольный компьютер AME System ErgoMan. AME System ErgoMan 4 страницы. Height adjustable workstation

Печатать страницу

Memory positions can be bypassed by pressing the "up" or "down" arrow buttons at any time

Adjusting the display to show the correct height:

Sometimes, due to power outages, workstation movement or different thickness bench tops, it may be necessary to reset

the displayed LED height shown on your switches LED screen. The default setting should show 68cm as the lowest height.

If necessary, the following procedure will reprogram the switches height display:

Press and hold both the up ("Parallel Up") and down ("Parallel Down") arrow buttons at the same time for

approximately 5 seconds. The display will show three minus signs (---) and then the display will revert to showing

the height

The height can then be adjusted by using either the up ("Parallel Up") and down ("Parallel Down") arrow

buttons, depending on the reading

The switch will return to normal operation after 5 seconds of inactivity, indicated by a short blink on the LED

screen

Ergonomic guidelines for setting your workstation up

Deciding on an ergonomic work height can be a bit tricky, but a strong ergonomic position is the most important aspect of

a healthy work style. Using the below guidelines can help you create a comfortable and healthy work environment, this

includes your workstation and your chair (if you have one).

Firstly, your chair height should be adjusted so that your feet are flat on the floor and your thighs are parallel to

the floor

Adjust your workstation height so that your shoulders are relaxed with your forearms resting on the workstation

Small height adjustments can be made to suit the task being done

When you want to stand, adjust the workstation to your standing height. As above, adjust the height so that your

shoulders are relaxed with your forearms resting on the desk

Small height adjustments can be made to suit the task being done

Adjust your working position between sitting and standing regularly throughout the day to gain the maximum

benefits from your desk, as well as creating a healthy and productive working environment

Maintenance guide

Fortunately, our lifting system is maintenance free and requires little to no maintenance at all. If you would still like to take

care of your legs, below is a quick rundown of things that can be done to increase the life of your legs and ensure they are

kept in optimal condition for years to come:

Regularly inspect the connections, cables and plugs. Check for correct functioning as well as fixing points.

Clean dust and dirt on the outside of the system using a clean, damp cloth to keep the surface clean

Light stains can be removed with a microfiber cloth or soft cotton rag dampened with warm soapy water. Wipe

over the surface and buff dry immediately

Stubborn stains can be removed using a cleaning agent (SPRAYnWIPE, WINDEX, etc. Be sure to avoid baking soda

as an ingredient). Apply the spray directly to the cleaning rag or a microfiber cloth. Using firm pressure work the

cleaner over the entire area in a circular motion. Follow up immediately with a dampened cloth and buff dry

Safety Precautions

To prevent fire and shock hazard, do not open the control box or expose the desk to water or moisture

To avoid electrical shock, do not open the control box. Refer servicing to AME System only.

DO NOT use abrasive cleaners such as bleach, ammonia, acid, abrasive powders, caustic products, acetone,

thinners, MED (methyl ethyl ketone) or similar hydrocarbons

NEVER use oven cleaners, wire wool, scouring pads or sandpaper

Wipe off all food and drink spills immediately

Warranty Period

Unless otherwise agreed, the standard warranty period on our lifting system is 36 months. This warranty is against

manufacturing faults from the production date. This can be found on the label on the rear of the actuator, closest to the

bracket connection. This warranty does not cover unsanctioned tampering, incorrect operation, violent treatment. AME

System reserves the right to decide if the warranty conditions have been breached, if so this decision will render the

warranty ineffective/invalid.

ErgoMan Height Adjustable Workstation User Guide

V1.0.1 June 2013