AKSO CLORO Tester Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Испытательное оборудование AKSO CLORO Tester. AKSO CLORO Tester 8 страниц.

6. MAINTENANCE

BATTERY INSTALATION/REPLACEMENT

When the display displays Low Battery, replace the

battery as described below:

1) Turn off the instrument by holding down the Power-

Measurement button until the display is switched off;

2) Remove the base clamping screw at the bottom of the

instrument, using a "Philips" wrench;

3) Undock the base of the meter by pulling it carefully;

4) Removed the used battery from the compartment and

disconnect it from the clip;

5) Plug the new battery into the clip and snap it into the

compartment;

6) Replace the base of the instrument, observing its correct

position;

7) Replace the Philips screw, tightening it without forcing it.