Canon 1438B002 - PIXMA iP4300 Photo Printer Начните здесь - Страница 2

Windows

Printer Driver Installation and Print Head Alignment

®

Note

• The screens below refer to Windows XP Service Pack 2 installation.

Screens may vary depending on the operating system you are using.

• For Windows XP or Windows 2000, log on to Windows as a member of the

Administrators group before continuing.

• Before installing the driver, disable all anti-virus programs and automatically

loading programs.

a

Be sure to TURN THE PRINTER OFF before continuing.

(1) Press the POWER button.

(2) Make sure that the POWER lamp stops flashing.

b

Turn the computer on and start Windows.

Important

If you see the Found New Hardware Wizard, remove the USB cable. Click

Cancel to quit the screen. Next, turn off the printer. Then proceed from step 3

to install the printer driver.

Insert the Setup CD-ROM. The setup program should run

c

automatically.

Note

The setup program should run automatically. If the installer in the CD-ROM does

not run automatically, click Start and select My Computer, then double-click the

CD-ROM icon

.

When the main menu appears, click Easy Install.

d

Note

• Select Easy Install in order to install the printer driver, on-screen manuals, and

application software. Select Custom Install in order to choose the options you

would like to install.

• To install PhotoRecord and Adobe

RGB (1998), click Custom Install and follow

®

the on-screen instructions. If you are using Windows Me/98, Adobe RGB cannot

be installed.

When the list of applications to install appears, confirm the

e

contents, click Install.

Note

Move the cursor over items to display explanations of each application below.

f

Read the License Agreement carefully and click Yes.

Follow the on-screen instructions to install the software.

If a message asking for your confirmation to restart your

computer appears, click OK.

g

When the Printer Connection screen appears, make sure

that the printer is connected to the computer with a USB

cable, then TURN THE PRINTER ON. The software will

begin identifying the printer port being used.

Important

If you cannot go to the next procedure after 2 minutes, refer to "Trouble-

shooting" instructions in the User's Guide on-screen manual.

Part no. QT5-0427-V02 © 2006 Canon Inc. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. "Adobe" and "Adobe RGB (1998)" are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product and brand names are trademarks

of their respective owners. Specifications subject to change without notice.

h

When the Print Head Alignment screen appears, ensure

that a sheet of letter- or A4-size blank paper is loaded in the

Auto Sheet Feeder (top paper feeder). Click Execute, read

the message and click Print Head Alignment.

Note

• Print head alignment will take about 6 minutes to complete. Do not start another

operation here.

• Do not open the Top Cover while printing.

i

Print head alignment is automatically adjusted by printing

the pattern below.

Note

• The pattern is printed in black and blue.

• When Automatic Print Head Alignment cannot be executed properly, the ALARM

lamp on the printer will flash orange eleven times. Refer to "ALARM Lamp

Flashes Orange" in "Troubleshooting" of the User's Guide.

After print head alignment is completed, click Next.

j

When the Installation Results screen appears, click Next.

k

l

Follow the on-screen instructions to register your product.

Note

When the User Registration screen appears, follow on-screen instructions to

register your product. You will need your product serial number, which is located on

the inside of the printer. See Step 1-

on the front page.

e

m

When the Installation completed successfully screen

appears, click Exit.

If Restart is displayed, make sure that the Restart the system now

(recommended) check box is selected, then click Restart.

Software installation and print head alignment

is now complete.

Macintosh

Printer Driver Installation and Print Head Alignment

®

Important

Since Mac

OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or

®

earlier are not supported, do not connect the printer to these.

Note

• Use Mac OS X v.10.2.8 to 10.4.x.

• The screens below refer to Mac OS X v.10.4.x installation. Screens may vary

depending on the operating system you are using.

• Log on as an Administrator before continuing.

• Before installing the driver, disable all anti-virus programs and automatically

loading programs.

a

Turn on your Mac and your printer and insert the Setup CD-

ROM.

Note

If the CD-ROM folder does not open automatically, double-click the CD-ROM icon

on the desktop.

b

Double-click the Setup icon.

When the Authenticate screen appears, enter your

c

administrator name and password. Click OK.

If you do not know your administrator name or password,

click

, then follow the on-screen instructions.

d

When the main menu appears, click Easy Install.

Note

Select Easy Install in order to install the printer driver, on-screen manuals, and

application software. Select Custom Install in order to choose the options you

would like to install.

e

When the list of applications to install appears, confirm the

contents, then click Install.

Note

Move the cursor over items to display explanations of each application below.

Read the License Agreement carefully and click Yes.

f

Follow the on-screen instructions to install the software.

When the Print Head Alignment Recommended screen

g

appears, click Next.

h

Follow the on-screen instructions to register your product.

Note

When the User Registration screen appears, follow on-screen instructions to

register your product. You will need your product serial number, which is located

on the inside of the printer. See Step 1-

e

on the front page.

When the Installation completed successfully screen

i

appears, click Restart.

The system is restarted automatically.

j

Start the print head alignment procedure.

a. After restarting the computer, select Applications from the Go menu. Double-

click the Utilities folder, then the Printer Setup Utility (Print Center when

using Mac OS X v.10.2.8) icon.

b. When the Printer List screen appears, select iP4300, then click Utility (Con-

figure when using Mac OS X v.10.2.8) icon.

If the printer is not displayed on the Printer List, click Add to add the printer.

For details, follow the instructions in Mac Help.

c. Select iP4300 and click Maintenance.

d. Ensure that a sheet of letter- or A4-size blank paper is loaded in the Auto

Sheet Feeder (top paper feeder).

e. Click the down-arrow to select Test Print. Click the Print Head Alignment

icon and follow the on-screen instructions.

Note

• Print head alignment will take about 6 minutes to complete. Do not start another

operation here.

• Do not open the Top Cover while printing.

Print head alignment is automatically adjusted by printing

k

the pattern below.

Note

• The pattern is printed in black and blue.

• When Automatic Print Head Alignment cannot be executed properly, the

ALARM lamp on the printer will flash orange eleven times. Refer to "ALARM

Lamp Flashes Orange" in "Troubleshooting" of the User's Guide.

Click Quit to exit the Canon IJ Printer Utility.

l

Software installation and print head

alignment is now complete.

Printed in Thailand.