Acer AL1716 Руководство пользователя - Страница 13

PLUG AND PLAY

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the

VESA DDC STANDARD. It allows the monitor to inform the host system of

its identity and, depending on the level of DDC used, communicate

additional information about its display capabilities.

The DDC2B is a bidirectional data channel based on the I²C protocol. The

host can request EDID information over the DDC2B channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO

VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE

PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Green monitor standards as set by the Video

Electronics Standards Association (VESA) and/or the United States

Environmental Protection Agency (EPA) and The Swedish Confederation

Employees (NUTEK). This feature is designed to conserve electrical energy

by reducing power consumption when there is no video-input signal

present. When there is no video input signal this monitor, following a

time-out period, will automatically switch to an OFF mode. This reduces

the monitor's internal power supply consumption. After the video input

signal is restored, full power is restored and the display is automatically

redrawn. The appearance is similar to a "Screen Saver" feature except the

display is completely off. The display is restored by pressing a key on the

keyboard, or clicking the mouse.

USING THE RIGHT POWER CORD :

The accessory power cord for the Northern American region is the wallet

plug with NEMA 5-15 style and is UL listed and CSA labeled. The voltage

rating for the power cord shall be 125 volts AC.

Supplied with units intended for connection to power outlet of personal

computer: Please use a cord set consisting of a minimum No. 18 AWG,

type SJT or SVT three conductors flexible cord. One end terminates with a

grounding type attachment plug, rated 10A, 250V, CEE-22 male

configuration. The other end terminates with a molded-on type

connector body, rated 10A, 250V, having standard CEE-22 female

configuration.

Please note that power supply cord needs to use VDE 0602, 0625, 0821

approval power cord in European counties.