Connecting to a Digital Camera
To connect a PictBridge-compliant digital camera to this printer, use the USB cable supplied with the
digital camera (for connection to a computer).
Do not connect any equipment other than the camera ready for "PictBridge" or Canon "Bubble Jet Direct" to the Direct Print
Port of the printer. If you do so, electric shock, fire, or damage to the camera could result.
When producing photos with the digital camera connected to the printer, it is advisable to use the AC adapter supplied
with the camera. If you use the camera battery, be sure to charge it fully.
Depending on the model or brand of your camera, you may have to select a mode of producing photos compliant with
"PictBridge" before connecting the camera.
You may also have to turn on the camera or select Play mode manually after connecting the camera to the printer.
Perform necessary operations according to the Instruction Manual supplied with your camera.
1
Set up the printer.
Follow the procedure explained in the Quick Start Guide supplied with your printer.
The print heads cannot be aligned using the controls of the digital camera. To align print heads, use the
controls on the operation panel of the printer.
2
Turn on the printer.
3
Connect the digital camera to the printer.
(1) Make sure the camera is turned off.
(2) Connect the camera to the printer using the USB
cable (for connection to a computer) supplied with
the camera.
(3) Set up the camera for direct printing.
When the connection between the camera and
printer has been established, the message of "Digital
camera connected" is displayed on the LCD.
By pressing the "Settings" button, you can confirm
the current setting status.
* The power-on sequence may differ depending on the model or brand of the camera.
Печатать страницу