Setting up the Card Slot as the Memory Card Drive of the
Computer
The card slot of the printer can also be used as the memory card drive of the computer.
• To use the card slot of the printer as the memory card drive of the computer, the printer must be
connected to the computer and the Memory Card Utility (Windows) or BJ Utility (Macintosh) must
have been installed in the computer. If the utility is not installed, install it following the installation
procedure explained in the Quick Start Guide.
• When Read/write mode is selected, neither printing nor maintenance can be done.
After you are finished with using the card slot as a memory card drive for your computer, be sure to
select Read-only mode again.
W
1 1 1 1
Ensure that the printer and the computer are turned on.
2 2 2 2
Open the USB memory card setup window.
(1) Ensure that no memory card is inserted in the card slot. If a memory card is inserted in the card
slot, remove it. See "Removing a Memory Card" on page 8.
(2) Select All Programs (or Program) from the Start menu. Next, select Canon Utilities, Memory
Card Utility, and then USB Memory Card Settings.
The USB Memory Card Settings window appears.
3 3 3 3
Specify the read/write attribute.
(1) Click Next.
The Read/write attribute setting window appears.
(4) Click Complete.
The selected read/write attribute is saved.
(2) Specify the read/write attribute.
Read-only mode
... The card slot is used only for reading.
Be sure to select this mode when printing images.
Read/write mode
... The card slot is used as the memory card drive of
the computer. Image data can be written into the
memory card.
(3) Click Next.
When you have selected Read/write mode, read
the precaution and click Next.
29
Печатать страницу