Canon 9316A015AA Упрощенное руководство по обслуживанию - Страница 5
Просмотреть онлайн или скачать pdf Упрощенное руководство по обслуживанию для Принтер Canon 9316A015AA. Canon 9316A015AA 24 страницы. Desktop serial color bubble jet printer
Печатать страницу
3. ERROR DISPLAY
Errors are indicated by the LED, and warnings are displayed on the monitor of the computer connected
to the printer.
3-1. Operator Call Error (LED Blinking in Orange)
LED
Error [Error code]
blinking
2 times
No paper. (ASF) [1000]
No CD-R tray. [1001]
No paper in the cassette. [1003]
(No paper in the front paper
feed cassette.)
3 times
Paper jam. [1300]
Paper jam in the under guide.
[1304]
Paper jam in the rear guide.
[1303]
Front door closed. [1250]
4 times
No ink.
[1601 / 1611 / 1612 / 1613]
5 times
The print head is not installed
[1401], or it is not properly
installed (EEPROM data of the
print head is faulty) [1403 /
1405].
6 times
Inner cover open. [1841]
Inner cover open (during
printing on paper). [1846]
CD-R tray guide closed (during
CD-R printing).
[1850 / 1855]
CD-R tray guide open (during
printing to paper). [1851 /
*1
1856]
*1
7 times
No CD-R or DVD-R. [1002]
8 times
Warning: The waste ink
absorber becomes almost full
(approx. 95% of the maximum
capacity). [1700]
Set the paper in the ASF, and press
the Resume/Cancel button.
*1
Set the CD-R tray, and press the
Resume/Cancel button.
Set the paper in the cassette, and
press the Resume/Cancel button.
Remove the jammed paper, and
press the Resume/Cancel button.
Open the paper output tray.
Replace the empty ink tank(s), or
press the Resume/Cancel button.
Install the print head properly, and
close the access cover.
Or, with the print head installed, turn
the printer off and on.
*2
Close the inner cover, and press the
Resume/Cancel button.
Close the inner cover, and press the
*2
Resume/Cancel button.
Open the CD-R tray guide, set the
CD-R tray properly, and press the
*1
Resume/Cancel button.
Close the CD-R tray guide, and
press the Resume/Cancel button.
After setting a CD-R or DVD-R in the
tray, set the tray in the tray guide,
and press the Resume/Cancel
button.
Pressing the Resume/Cancel button
will exit the error, and enable
printing.
In repair servicing, replace the
bottom case unit (QM2-1249), or the
ink absorbers (QC1-4222 / 4223 /
4224 / 4263 / 4264 / 4864).
Corrective action
5
Remarks
Pressing the Resume/Cancel
button will exit the error without
ink tank replacement, however,
ink may run out during printing.
The service call error, indicating
the waste ink absorber is full, is
likely to occur soon.