Canon 9318A003AA Упрощенное руководство по обслуживанию - Страница 8
Просмотреть онлайн или скачать pdf Упрощенное руководство по обслуживанию для Принтер Canon 9318A003AA. Canon 9318A003AA 22 страницы.
Печатать страницу
4-2. Service Mode
Function
EEPROM information print
- Destination
- ROM version
- Waste ink amount
- Total number of sheets fed
EEPROM initialization
Waste ink counter reset
Destination settings
Print head deep cleaning
<Service mode operation procedures>
1)
With the front cover closed, and the printer power turned off, while pressing the Resume/Cancel
button, press and hold the Power button. (DO NOT release the buttons. The LED lights in green
to indicate that a function is selectable.)
2)
While holding the Power button, release the Resume/Cancel button. (DO NOT release the
Power button.)
3)
While holding the Power button, press the Resume/Cancel button 2 times, and then release
both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed,
the LED lights alternately in orange and green, starting with orange.) During initial operations,
the LED blinks in green.
4)
When the LED light sin green, press the Resume/Cancel button the specified number of time(s)
according to the function listed in the table below. (Each time the Resume/Cancel button is
pressed, the LED lights alternately in orange and green, starting with orange.)
Time(s)
0 times
1 time
2 times
3 times
4 times
5 times
6 times
7 to 9 times
10 times
5)
After the function (menu) is selected, press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu
selection mode automatically.)
Procedures
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
LED
Function
Green
Power off
Orange
Service test print
Green
EEPROM information print
Orange
EEPROM initialization
Green
Waste ink counter resetting
Orange
Destination settings
Green
Print head deep cleaning
Orange
Not used in servicing
Green
Return to the menu selection
Remarks
Set a sheet of A4-, letter-, or larger-sized
paper.
For print sample, see APPENDIX 2, iP2000
EEPROM INFORMATION PRINT SAMPLE.
The following items are NOT initialized:
- Destination settings
- Waste ink counters
The following 3 methods are available:
- Resetting the main waste ink counter (0%)
- Re-setting the main waste ink counter
value to 50%
- Resetting the platen waste ink counter
(0%)
Remarks
When the print head is not installed, the
carriage returns and locks in the home
position.
Proceed to the step 5), and follow the
Waste ink counter reset procedures.
Proceed to the step 5), and following the
Destination settings procedures.
8