Aero-motive RB4 Series Руководство по эксплуатации

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты Aero-motive RB4 Series. Aero-motive RB4 Series 4 страницы. Retractors

IMPORTANT SAFETY INFORMATION

Please read this manual carefully and follow its instructions. Improper use or failure to follow these instructions could

result in serious injury, property damage or death

and maintenance of this product. Keep this manual for future reference.

The following signal words and meanings are intended to explain the levels of risk associated with this product.

DANGER:

Indicates a hazardous situation that, if not avoided, WILL result in serious injury or death

WARNING: Indicates a hazardous situation that, if not avoided, COULD result in serious injury or death

CAUTION:

Indicates a hazardous situation that, if not avoided, MAY result in minor or moderate injury

INSTALLATION

MOUNTING

READ INSTRUCTIONS BEFORE USE To avoid injury: all operators should be instructed in

CAUTION:

the safe, proper use and maintenance of this product.

WARNING: Main support device must have break strength exceeding 6 times weight of load.

CAUTION:

Use new cotter pin when re-assembling clevis pin.

CAUTION:

Do not adjust mainspring tension until tool and attachments are suspended from retractor.

Mounting retractor in wrong configuration, with cable pulling against guide, can cause

CAUTION:

premature cable wear and cable to jam inside retractor.

 Attach retractor to main support

located above work area with

upper mount (swivel fork) and

clevis pin. - See FIG.01

 Secure clevis pin with washer and

cotter pin. - See FIG.01 for upper

mount reference dimensions.

 NOTE: Support must allow swivel

fork to pivot 30° from vertical axis,

perpendicular to clevis pin axis.

Retractor must not be pulled

sideways more than 30° or exceed

free play between support and

swivel fork – See FIG. 02

SM1110-06

Operators must be trained and instructed in the safe and proper use

FIG. 01

Page 1 of 4

RB2 & RB4 Series Retractors

Service Manual

FIG. 02

REV - C