Aktakom ASE-1107 Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Паяльный пистолет Aktakom ASE-1107. Aktakom ASE-1107 15 страниц.

Error Messages

Various error messages will be displayed when there is a problem with the soldering station. If the

following message is displayed, see the trouble shooting guide.

– – – System Error

S – E Sensor Error

Flash of the Temperature Display

Heater Error

WARNING! * Disconnect the power plug before servicing. Failure to do so may result in electric

shock.

* If the power cord is damaged, it must be replaced by the manufacturer or

its service agent or similarity qualified person in order to avoid hazard.

After the power has been turned on, the system checks the

memory and the programs. If an abnormality is found,

– – – will be displayed, and all operations will be

completely stopped.

If there is a possibility of a failure in the sensor or

anywhere in the sensor circuit S – E will be displayed and

power to the soldering iron will be cut off.

If power is being sent to soldering iron and the tip

temperature goes below the heater—error temperature—

tolerance setting, the temperature display will flash. This

indicates the possibility of a heater malfunction.