Acer AL718 Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Монитор Acer AL718. Acer AL718 44 страницы. Acer monitor user's guide
Также для Acer AL718: Руководство пользователя (8 страниц)

Печатать страницу
Acer AL718 Руководство по эксплуатации

4. THEORY OF OPERATION

This section describes the function of the LCD monitor per functional block.
button board.
1. MB BOARD
The MB board is a four-layer, single-landed design with ground and internal planes provided.
The VGA cable is a signal cable that contains video signal, sync signal and DDCsignal from PC VGA adapter.
This system board consists of 3 functional areas : flat panel controller, flash ROM and LVDS transmitter.
1.1 Flat panel controller...... gm2120 (U8)
The heart of the system board is Genesis gm2120. The gm2120 is a graphics processing IC for LCD
monitor. It provides all key IC functions required for LCD panel. On-chip functions include a
high-speed triple-ADC , PLL, high sacling engine, OSD controller and on-chip microcontroller.
a) Clock Generation :
Crystal Input Clock (TCLK and XTAL). This is the input pair to an internal crystal oscillator and
corresponding logic. A 14.318 MHz crystal is recommended.
b) Hardware Reset ( Pin 5 )
Hardware Reset signal is generated by MAX809 (U10).It assert a reset signal at least 100 ms.
c) Analog to Digital Converter
The gm2120 chip has three ADC's (analog-to-digital converters), one for each color (red, green and blue)
The analog RGB signals are connected to gm2120 as described below
Pin Name
Red +
Red -
Green +
Green -
Blue +
Blue -
d) OSD :
The gm2120 has a fully programmable ,high-quality OSD controller.The on-chip static RAM(4096 words
by 24 bits) stores the cell map and the cell definitions.
e) On-Chip Microcontroller (OCM)
The gm2120 on-chip microcontroller(OCM) serves as the system microcontroller.That is , it programs the
gm2120 and manages other devices in the system such as the keypad, the backlight, LED, audio and
non-volatile RAM.using general purpose input/output (GPIO) pins.
AL718
Pin Number
171
170
167
166
163
162
4-1