10ZiG Technology Limited RBT-402 Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сервер 10ZiG Technology Limited RBT-402. 10ZiG Technology Limited RBT-402 2 страницы.

Печатать страницу

5250 Hot keys

(Terminal Style)

Enter = Right CTRL

Field exit = ENTER

Error Reset = Left CRTL

Attention = Esc

Hotkey to next session = ALT + Tab

Dup = Numpad *

Roll up = Page Down

Roll Down = Page Up

Split Screen = right click on status bar in Desktop mode

RBT-402 Initial Configuration

Wizard

The first time the unit is powered on, you will be presented with a startup wizard. This

will create the initial settings for display and network.

Setting a Static IP address and Wireless

Should you need to set a Static IP Address do the following;

1. Click Start > Control Panel

2. Select the Network tab

3. Change the setting from DHCP to Static

4. Input your IP Address, Subnet mask and default gateway settings

5. Click Advanced to enter and DNS settings you may have

6. If you are using Wireless click on the Wireless Parameters

7. Enter your wireless network settings including WEP key.

Note

If the Wireless parameters button is missing, the wireless device is not being seen by the

Terminal. Linux models only support specific Wireless devices, if in doubt check with

BOSaNOVA support for a list of supported devices.

Mouse support

By default the RBT-402 expects to see a mouse, if you intend to use the unit without a

mouse, you must first define this in the Control panel > Input tab. Change the setting

there to read None.

Adding applications

RBT-402 Thin Client comes with no applications defined. To enable applications to be

used they have to be added. The RBT-402 has a choice of modes of operation, Desktop

mode (default), where the user sees a Windows type user interface. In this mode you can

add applications by clicking Start > application > add application or Start >

Connection Manager > Add.

In WBT mode, where the user interface looks like a CE.Net type Thin Client, you have

only the Connection Manager. To add applications here, simply click the

Configuration tab and click the Add button, a list of available applications will be

shown, select from the drop down list.

Hot Keys (WBT)

CTRL+ALT+END= Enables terminal connection manager

CTRL+ALT+ = Jumps back to the previous session

CTRL+ALT+ = Jumps to the subsequent session

Locking down the Thin Client

Once you have added and setup all the applications you need on the Terminal you can

lock down the Terminal to prevent changes being made. This can be done either by the

management software or on the Terminal itself. On the Terminal click Start > Control

panel. Go to the Security tab and click the hide connections configuration tab. It

would also be a good idea to add a password to this, therefore preventing the user sim-

ply un-checking this parameter.

Auto Start Applications

Any application can be set to automatically launch when the Terminal is powered on.

To do this start the Connection Manager, (either right click on the desktop or take

Start > connection manager) highlight the application you want to auto start and click

the startup button. You will have the option of auto start and default connection. If

this connection type is RDP or ICA you will also have the option of auto reconnect.

Default connection means that when more than one application is started, the one

which is left showing will be the one which is checked default.

Download the 10ZiG Management Software from