AIPTEK Qt CAM FLASH Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Цифровая камера AIPTEK Qt CAM FLASH. AIPTEK Qt CAM FLASH 18 страниц.

English

Switching the camera on / off

Keep pressing SW2 until the LCD is

activated, and the camera turns off after

30 seconds of inactivity. The LCD

indicates "Lr" for low resolution (QVGA

images) and "Hr" for high resolution(VGA

images). The LCD then displays the

number of the remaining pictures. To turn

off the camera, press SW2 for 2 seconds.

Press the shutter switch to take a picture.

A high pitched beep indicates that a

picture is taken successfully and the

counter decreases as well. A low beep

indicates insufficient light to take a picture.

A series of beeps suggest that the camera

is full.

Your camera has two switches - the shutter switch(SW1) and the mode

switch ( Sw2 ). As you keep pressing the mode switch, the LCD indicates "

Hr, 26,Ct, St, CL, and Lr" icons in order. To select the icon you want, press

the shutter switch. Note! If an icon is not selected within 5 seconds, the

LCD goes back to the picture remaining number. The following chart shows

the function of each icon.

.. 3 ..

Press Sw1 to take a picture

Press Sw2

LCD

is activated