American Standard 6030SMRHOL Инструкции по установке - Страница 2
Просмотреть онлайн или скачать pdf Инструкции по установке для Сантехническая продукция American Standard 6030SMRHOL. American Standard 6030SMRHOL 4 страницы. Solid surface shower bases
Печатать страницу
LEFT HAND
4-9/16"
OUTLET
(116mm)
17-3/4"
(451mm)
36"
(914mm)
1"
(25mm)
2"
(51mm)
1
Ensure that the floor and stud walls are square and plumb on a level
floor as shown in Figure A. Provide a 6" x 6" (152 x 152mm) opening in
the floor for the drain and refer to the product chart for actual drain
location. The lower portion of the drain mount must fit into the 6"x 6"
(152 x 152mm) opening. Check by dry fitting the shower base in the
final location. Draw a line 3" (76mm) above the level subfloor on the
wall studs at each side of the opening.
NOTE: Shower pans are to be installed on sub- oors not nished oors. Shower
pans will drain properly provided they are installed on a level surface.
Check the floor with a long level. A long level is more likely to detect level of
sub-floor at its greatest dimensions. Check front-to-back at the left and right sides
and at the center. Repeat for side-to-side dimensions. Finally check the diagonals.
Depending on the results, some additional prep work may be necessary.
6036SMLHOL
60"
(1524mm)
FRONT
TOP VIEW
2" (51mm)
THRESHOLD DEPTH
RIGHT SIDE
24"
(610mm)
17-3/4"
(451mm)
36"
(914mm)
1"
(25mm)
2"
(51mm)
6036SMRHOL
1"
(25mm)
2"
(51mm)
4836SMCOL
48"
(1219mm)
CENTER
OUTLET
FRONT
TOP VIEW
2" (51mm)
THRESHOLD DEPTH
RIGHT SIDE
MARK STUDS 3" ABOVE LEVEL SUBFLOOR
PVC Waste Pipe
FIGURE A
2
60"
(1524mm)
4-9/16"
(116mm)
FRONT
TOP VIEW
2" (51mm)
THRESHOLD DEPTH
RIGHT SIDE
90°
2" (51mm)
C/L
(152 x 152mm)
(See Product Chart for Drain Location)
755438-100 Rev. B 4/18
RIGHT HAND
OUTLET
17-3/4"
(451mm)
36"
(914mm)
90°
6" x 6"
Opening