bObi CLASSIC Инструкции по установке - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по установке для Стойки и подставки bObi CLASSIC. bObi CLASSIC 2 страницы. Curbside

MOUNTING INSTRUCTIONS

Mounting a BOBI mailbox to a wall or fence

Mounting a BOBI mailbox through a fence

Mounting a BOBI mailbox on a BOBI ROUND stand

1. Drill out the 4 preformed holes which are on the side of the mailbox using a ¼ or 6mm drillbit.

Attention! Holes should be drilled with a low speed drill (maximum 500 rpm) and on stainless

steel mailboxes it is recommended to use a drillbit made from hardened steel.

2. Fasten the mailbox to the stand using the fittings provided.

3. Dig a hole ca. 17 x 17 x 17. Place the mailbox and stand in the ground, check the level and fill

the hole with coarse gravel or concrete. We recommend using a quick set concrete for a secure

and solid installation.

Drill out the 4 preformed holes which are in the back of

the mailbox using a ¼ or 6 mm drillbit.

Attention! Holes should be drilled with a low speed

drill ( maximum 500 rpm ) and on stainless steel

mailboxes it is recommended to use a drillbit made

from hardened steel.

Fix the mailbox from inside using the 4 screws provided.

Drill out the 4 preformed holes which are on the side of

the mailbox using a ¼ or 6 mm drillbit.

Attention! Holes should be drilled with a low speed

drill ( maximum 500 rpm ) and on stainless steel

mailboxes it is recommended to use a drillbit made

from hardened steel.

Fix the mailbox from inside using the 4 screws provided.

Before installing the

mailbox to the curbside

see the instructions on

the reverse side to

ensure its correct

placement and height

at the street.