Bobot WIN SPIDER Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Ультразвуковой очиститель ювелирных изделий Bobot WIN SPIDER. Bobot WIN SPIDER 8 страниц. Window cleaner
Печатать страницуConnect to Power Supply
3
Plug in BOBOT WIN SPIDER
Press the Power Button
4
A.
Press power button for 2
B.
Place your BOBOT WIN SPIDER
secondes to turn on your
on glass, press again the power
BOBOT WIN SPIDER
button to start.
Walking belt auto clean method
5
4
3
C.
You can also start it from your
remote control "START" button.
Caution: Before starting, make sure the edge of
BOBOT WIN SPIDER is 8cm or more away
from window frames or corners.
Every time before and after using, the walking belt should be cleaned to prevent
dirt and dust from sticking on, to enhance the performance of machine. Steps to
clean walking belt as follows:
(1) Turns on the machine (press power button).
(2) Put the machine in the reverse direction (belt up) on the workbench.
(3) Press a sensor (any of 4 corners) for about 8 seconds, the machine
automatically enters belt cleaning mode, the drive wheels on both sides
rotate and the vacuum motor stops.
(4) Use a clean cloth, slightly wipe on the belt surface.
(5) After cleaning the belt, press switch button to shut off.
The window cleaner must be
Do not spray water on the glass,
connected to the power supply
the wet glass will make the
and safety rope .
driving tread slip!
while using could lead to
dropping.
4